Poly bush group buy

Everythiong related to chassis, suspension, steering, tyres, etc...
Post Reply
User avatar
norma
Posts: 334
Joined: Sat Apr 07, 2007 10:24 pm
Are you a Stylus owner?: yes
Location: Chester UK

Poly bush group buy

Post by norma »

I have got hold of Wisbech Engineering for a price for replacement bushes.
They have the original drawings and the dimensions are correct for my 1997 chassis.
(see attached - hopefully!)
Anyone interested in a group buy? It might help the price.

Thanks!
Attachments
Bush Assembly.jpg
SSC Sylus 2.0 Dunnell Black Top Zetec weber alpha / DTA + cams, 236@fly. (aka NORMA)

stylussprinter
Stylus owner
Posts: 3769
Joined: Fri Mar 10, 2006 8:49 pm
Are you a Stylus owner?: yes
Location: ASTON CLINTON BUCKS

Re: Poly bush group buy

Post by stylussprinter »

Still got a dozen sets thanks , centres stainless
I just love the Stylus but she keeps swallowing £££ !
Alfa Red 159 2.4 jtdm ti 260bhp 365lbft / BilsteinB12 + Adjustable Powerflex camber/castor bushes. Red STYLUS 2lt zetec 231bhp 185lbft Dunnell . RED 1972 Alfa 2lt GTAm replica 170bhp.

User avatar
norma
Posts: 334
Joined: Sat Apr 07, 2007 10:24 pm
Are you a Stylus owner?: yes
Location: Chester UK

Re: Poly bush group buy

Post by norma »

bloody show off lol
:-)
SSC Sylus 2.0 Dunnell Black Top Zetec weber alpha / DTA + cams, 236@fly. (aka NORMA)

stylussprinter
Stylus owner
Posts: 3769
Joined: Fri Mar 10, 2006 8:49 pm
Are you a Stylus owner?: yes
Location: ASTON CLINTON BUCKS

Re: Poly bush group buy

Post by stylussprinter »

:P :lol: :lol: :lol:
I just love the Stylus but she keeps swallowing £££ !
Alfa Red 159 2.4 jtdm ti 260bhp 365lbft / BilsteinB12 + Adjustable Powerflex camber/castor bushes. Red STYLUS 2lt zetec 231bhp 185lbft Dunnell . RED 1972 Alfa 2lt GTAm replica 170bhp.

parleys
Posts: 15
Joined: Thu Aug 13, 2009 2:30 pm
Are you a Stylus owner?: yes

Re: Poly bush group buy

Post by parleys »

If you add up the dimensions of the outer sleeve and the polybush it comes to the same length of the inner sleeve.
The inner sleeve needs to protrude both ends. Looking at hints to there installation the inner sleeve should protrude by 0.02" (0.5mm). I can see the dimension 1.5+ but how much +?
When building my stylus the outer sleeves were not square and needed machining to enable the inner sleeve to be pinched tight.

User avatar
se7ensport
Stylus owner
Posts: 349
Joined: Thu Aug 24, 2006 3:17 pm
Location: Bristol

Re: Poly bush group buy

Post by se7ensport »

I used these https://www.ondrives.com/cps13x19x05

I was able to space to my exact requirements; all sleeves set to +0.5mm over the bush width. Clamped up very tight and the bush rotates around the sleeve with minimal resistance and near zero lateral play.

User avatar
MattD
Stylus owner
Posts: 693
Joined: Wed Mar 01, 2006 11:48 am
Are you a Stylus owner?: yes
Location: Liphook, Hampshire, UK

Re: Poly bush group buy

Post by MattD »

I've got a bin full from Wisbech..... how many do you want :lol:
SSC Stylus Integrale Turbo16V
Kit 1999, OTR 2002, and still tweaking....

User avatar
norma
Posts: 334
Joined: Sat Apr 07, 2007 10:24 pm
Are you a Stylus owner?: yes
Location: Chester UK

Re: Poly bush group buy

Post by norma »

MattD wrote:I've got a bin full from Wisbech..... how many do you want :lol:
You need to check your pm's more often then, as I asked you if you could supply before going to wisbech lol
SSC Sylus 2.0 Dunnell Black Top Zetec weber alpha / DTA + cams, 236@fly. (aka NORMA)

User avatar
MattD
Stylus owner
Posts: 693
Joined: Wed Mar 01, 2006 11:48 am
Are you a Stylus owner?: yes
Location: Liphook, Hampshire, UK

Re: Poly bush group buy

Post by MattD »

norma wrote:
MattD wrote:I've got a bin full from Wisbech..... how many do you want :lol:
You need to check your pm's more often then, as I asked you if you could supply before going to wisbech lol
LOL :roll:
SSC Stylus Integrale Turbo16V
Kit 1999, OTR 2002, and still tweaking....

Post Reply