clubstylus

OK guys, I have the fibreglass fabricator at the workshop for the next couple of weeks.

We're in the process of making 4 body sets, 2 classics & 2 RTs for customers
This is probably the last throws of SSC at the moment, as I will be shutting down the SSC Ltd company at the end of May.

So... if you would like any fibreglass bodywork parts, doors, boots, bonnets, hood rails, dashboards, etc... this is the last opportunity via myself to do so.
Unfortunately, I'm still not able to supply the perspex/polycarbonate style headlight covers.

Best Regards to all.

Matt

Sorry to hear that you are shutting down SSC. What will be happening to the chassis jigs and the body moulds?
Do you have a photo of the dash and dash top?

Hi Keith

Undecided on the jigs & moulds.... will be going to Stoneleigh to chat...

Will take a few pics of the dash parts, theres 3 pieces... Top,front face (for clocks/dials), and the under dash.

Cheers

Matt

Links to dash pics...

https://www.dropbox.com/s/a0dy6vuvv7950 ... 4.jpg?dl=0

https://www.dropbox.com/s/28zu0rwm1bzmf ... 7.jpg?dl=0

https://www.dropbox.com/s/7e7san1e6bsl5 ... 6.jpg?dl=0

https://www.dropbox.com/s/nmerwehz5djm4 ... 6.jpg?dl=0

Thanks Matt, can you give me a price for those and do you have the moulds for the RT conversion panels along with the longer front wishbones & rocker arms and prices.

Keith

Yes to all that... Will drop you a PM.

Rgds
Matt

Hi

If you can pm me the price for a dash front and top it would be much appreciated

Shooter

Hi Matt,

I'm after the following for standard Stylus, if possible.

- Dipped rear trailing arms
- Later cranked/braced lower front wishbones

Cheers,
Giles

Hi Matt

Can you tell me increase in front track the wider front rocker arm and lower wishbones provide? I’m assuming that they work with Sierra hubs..?

What camber is possible with them? To get the old ones to -2.5 I had to have the wishbones extended.

And a price for the above via PM would be great.


Thanks
Alex

Shooter, Giles, & Alex.....

Blimey, 5 mins looking the other way = posts to reply to !!
I will get onto these & reply properly tomorrow !

Have spent most of the day converting a shell from standard to RT... wow thats a lot of work !

Rgds

Matt

Hi Matt,

First time I've logged into the forum for months/years/decades! Can I get a price for the dash main panel (one with dials in it) as I'm not overly happy with my dial layout.
I could also do with a price for the cranked rear lower arms as well?

Sad to see the end of the project but completely understand how much time and effort these things take up.
Many thanks