Small step or giant leap?

Stylus related discussions
User avatar
Bikenuts
Stylus owner
Posts: 131
Joined: Tue Mar 28, 2006 2:16 pm
Are you a Stylus owner?: yes
Location: Weardale England

Post by Bikenuts »

gnalist wrote:Hi Bikenuts,

Sorry it's taken so long to get them but I've got some photo's apparently of the engine mounts on my car finally. It went from Tim to do the suspension to Essex for the head and then back to Tim again set up the suspension better before eventually going to a chap in Coventry who is now doing all the work that needed/I wanted doing. In fact the cars done more miles without me in it than with so far! :(
Anyway I asked him to do some of the mounts for you and he's done them...do you still need them? Really sorry it's taken so long but it's been shunted from pillar to post till I was happy with the work getting done. It's now got the BMW Mini Xenons in and they look awesome, and the new dash is looking like it'll be great too, there's also been a colour change to Porsche Cayenne titanium and it really suits the car. Just waiting for the interior to go in and the 17's to go on now and I can enjoy it finally! :D
Hi,
Sorry for the delay in replying; I’ve been a bit hectic. Anyway thanks to an on – off house move I’ve not done anything to the car for a while, think it was just a cunning ploy by the Mrs to get the house decorated before I permanently disappear into the garage though at the tender age of 40 I’ve finally learnt how to wall paper. So yes please the pictures would still be useful.

Matt aka Bikenuts
gnalist
Stylus owner
Posts: 35
Joined: Sun Jul 30, 2006 9:30 pm
Location: cardiff

Post by gnalist »

No worries, I've pm'd you fella.
hearbear
Stylus owner
Posts: 394
Joined: Thu Mar 02, 2006 11:00 pm
Are you a Stylus owner?: yes
Location: West of Edinburgh Scotland

Post by hearbear »

Cerberus wrote:
hearbear wrote:
Cerberus wrote: That sounds good George, if you could post a photo on here and we can take it from there :D :D

i was looking long and hard at doing something with this :idea: http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=007

Maybe turn it backwards and sink it in a bit :oops:

Phil
:D
Will do tomorrow

George
Good man

Phil :D
Image
Image
Image


this 32" long and 16" wide across the front at the widest and narrowing down to 12". it is 2" depth at the front tappering to flat at the rear.

Anay use let me know and we can sort something out.

Cheers George
Image
User avatar
Cerberus
Stylus owner
Posts: 460
Joined: Tue Aug 29, 2006 9:47 pm
Location: Bristol

Post by Cerberus »

hearbear wrote:
Cerberus wrote:
hearbear wrote: Will do tomorrow

George
Good man

Phil :D
Image
Image
Image


this 32" long and 16" wide across the front at the widest and narrowing down to 12". it is 2" depth at the front tappering to flat at the rear.

Anay use let me know and we can sort something out.

Cheers George
George YHM

Is that a stylus i see under there :lol:
Must try harder
hearbear
Stylus owner
Posts: 394
Joined: Thu Mar 02, 2006 11:00 pm
Are you a Stylus owner?: yes
Location: West of Edinburgh Scotland

Post by hearbear »

It is and one must remove the proverbial finger and get it finished :lol:
Image
hearbear
Stylus owner
Posts: 394
Joined: Thu Mar 02, 2006 11:00 pm
Are you a Stylus owner?: yes
Location: West of Edinburgh Scotland

Post by hearbear »

Phil

Finally posted of the bulge for you :oops:

Let me know when it turns up went by the post office.

Cheers George
Image
User avatar
Cerberus
Stylus owner
Posts: 460
Joined: Tue Aug 29, 2006 9:47 pm
Location: Bristol

Post by Cerberus »

hearbear wrote:Phil

Finally posted of the bulge for you :oops:

Let me know when it turns up went by the post office.

Cheers George
Top man George, will let you know went it arrives and post you off a gooses neck.

Phil :D
Must try harder
User avatar
Cerberus
Stylus owner
Posts: 460
Joined: Tue Aug 29, 2006 9:47 pm
Location: Bristol

Post by Cerberus »

Cerberus wrote:
hearbear wrote:Phil

Finally posted of the bulge for you :oops:

Let me know when it turns up went by the post office.

Cheers George
Top man George, will let you know went it arrives and post you off a gooses neck.

Phil :D


George you're a star it arrived today and is just perfect, so the postal service does work :roll:

Phil :D
Must try harder
hearbear
Stylus owner
Posts: 394
Joined: Thu Mar 02, 2006 11:00 pm
Are you a Stylus owner?: yes
Location: West of Edinburgh Scotland

Post by hearbear »

Cool want pics of it fitted :D couldn't believe how cheap it was to post with the size of it but miracles do happen :shock: I fired mine up today and sorted of the wiring up :D

George
Image
User avatar
Cerberus
Stylus owner
Posts: 460
Joined: Tue Aug 29, 2006 9:47 pm
Location: Bristol

Post by Cerberus »

hearbear wrote: I fired mine up today :D

George

Now i'm jealous :cry:

Phil
Must try harder
User avatar
Bikenuts
Stylus owner
Posts: 131
Joined: Tue Mar 28, 2006 2:16 pm
Are you a Stylus owner?: yes
Location: Weardale England

Post by Bikenuts »

Well I got busy (and brave :shock: ) over easter and widened my transmission tunnel. I cut out just the bare minimum at each stage to try and keep everything straight and it seems to have worked OK. I've just got to re panel the floor and tunnel side but that will have to wait till I've some more cash for ally sheet.

Image

Image
User avatar
Cerberus
Stylus owner
Posts: 460
Joined: Tue Aug 29, 2006 9:47 pm
Location: Bristol

Post by Cerberus »

hearbear wrote:Cool want pics of it fitted :D couldn't believe how cheap it was to post with the size of it but miracles do happen :shock: I fired mine up today and sorted of the wiring up :D

George
George, i will post your cheque off tomorrow thanks again :)

Phil :D
Must try harder
hearbear
Stylus owner
Posts: 394
Joined: Thu Mar 02, 2006 11:00 pm
Are you a Stylus owner?: yes
Location: West of Edinburgh Scotland

Post by hearbear »

Cerberus wrote:
hearbear wrote:Cool want pics of it fitted :D couldn't believe how cheap it was to post with the size of it but miracles do happen :shock: I fired mine up today and sorted of the wiring up :D

George
George, i will post your cheque off tomorrow thanks again :)

Phil :D
Received with thanks :D

Well in a moment of madness I spent yesterday rebonding the front back on the car I decided that the flip front on the classic just wasn't right so out came the resin and glass fibre thank god for a cracking week with the weather :D

George
Image
Post Reply