wheels + tyres

Everythiong related to chassis, suspension, steering, tyres, etc...
Pete&Matt
Stylus owner
Posts: 617
Joined: Thu Mar 09, 2006 4:08 pm

wheels + tyres

Post by Pete&Matt »

Where is the best place to get minilight style wheels? I like the ones that have the machined rim on them too.

What size was Tim putting on the latest cars? i think it was 15" x 5.5"?

What are the best tyres to use for road and occasional track? There were some ones that the caterham guys used that Tim really recommened?

Cheers

Matt
User avatar
Cerberus
Stylus owner
Posts: 460
Joined: Tue Aug 29, 2006 9:47 pm
Location: Bristol

Re: wheels + tyres

Post by Cerberus »

Pete&Matt wrote:Where is the best place to get minilight style wheels? I like the ones that have the machined rim on them too.

What size was Tim putting on the latest cars? i think it was 15" x 5.5"?

What are the best tyres to use for road and occasional track? There were some ones that the caterham guys used that Tim really recommened?

Cheers

Matt
Tyres are Avon CR500's, as for wheels you can save a lot of weight on the correct choice of wheels, minilights are not that light plus everyone seems to have them but it is personal choice as for rim size 15x7 then you can run 195s or 205s.
Anyway try here http://www.minilitewheels.com/

Phil
:D
Last edited by Cerberus on Wed Jan 16, 2008 12:41 am, edited 1 time in total.
Must try harder
User avatar
Werner Van Loock
Stylus owner
Posts: 531
Joined: Tue Feb 28, 2006 3:37 pm
Are you a Stylus owner?: yes
Location: Antwerp, BE
Contact:

Post by Werner Van Loock »

I still know a set for sale as the previous owner had them with tyres, but I didn't wan't them.

It are these:

Image
User avatar
Nissanman
Stylus owner
Posts: 239
Joined: Tue Jul 04, 2006 4:06 pm
Location: Brighton

Post by Nissanman »

CR500 are excellent, but very limited in sizes. Cheapest place to get them suprisingly is from Caterham.

And those look lime 13" ones to me......
Stylus with a SR20DET Nissan engine
Pete&Matt
Stylus owner
Posts: 617
Joined: Thu Mar 09, 2006 4:08 pm

Post by Pete&Matt »

werener - what size are those wheels?
stylussprinter
Stylus owner
Posts: 3772
Joined: Fri Mar 10, 2006 8:49 pm
Are you a Stylus owner?: yes
Location: ASTON CLINTON BUCKS

size

Post by stylussprinter »

They'll be 14 x 6 which is what Pete.P. always put on as standard. 13inch wheels give a wide choice of tyres and are very light. Even so , I'd go for 15 x 7 . If you want a good safe road tyre wet/dry then the A021 YOKO is the one to go for plus it will grip on track wet or dry. If you only really take your pride and joy out in the dry then go for YOKO A032,A048,TOYO R888 . These will grip like hell but be careful in a shower/damp and VERY careful in standing water :roll: Tim liked the CR500's though for road or track.
I just love the Stylus but she keeps swallowing £££ !
Alfa Red 159 2.4 jtdm ti 260bhp 365lbft / BilsteinB12 + Adjustable Powerflex camber/castor bushes. Red STYLUS 2lt zetec 231bhp 185lbft Dunnell . RED 1972 Alfa 2lt GTAm replica 170bhp.
Pete&Matt
Stylus owner
Posts: 617
Joined: Thu Mar 09, 2006 4:08 pm

Post by Pete&Matt »

I have just found Tims old price list and he lists 15X7 wheels.

I guess tyres are down to personal preference really. Yoko's have always been a good tyre. Tim said the CR500's were hard wearing but drippy though!
User avatar
Werner Van Loock
Stylus owner
Posts: 531
Joined: Tue Feb 28, 2006 3:37 pm
Are you a Stylus owner?: yes
Location: Antwerp, BE
Contact:

Post by Werner Van Loock »

It's the 14's, but don't know the asking price and if he still has them. But I can give you the phonenumber if you wan't. They might be cheap.
Pete&Matt
Stylus owner
Posts: 617
Joined: Thu Mar 09, 2006 4:08 pm

Post by Pete&Matt »

Thanks Werner, but were after 15's.

Matt
Pete&Matt
Stylus owner
Posts: 617
Joined: Thu Mar 09, 2006 4:08 pm

Post by Pete&Matt »

just been speaking with Demon Tweeks. The A021 are only avaliable in 225/50 X 15 at a cost of £146 + VAt each!!!

He recommeneded the R888's for our intention, but they dont like standing water apparantly, but are £64+VAT each, which is far better!

Looking at superlite wheels as they are much cheaper than other brands at the mo!
User avatar
Nissanman
Stylus owner
Posts: 239
Joined: Tue Jul 04, 2006 4:06 pm
Location: Brighton

Post by Nissanman »

I've gone for 235 R888's, I know they don't like standing water, but they are still apparently good in damp/wet conditions, and how much time will you spend in your car if it's that wet out?
Stylus with a SR20DET Nissan engine
stylussprinter
Stylus owner
Posts: 3772
Joined: Fri Mar 10, 2006 8:49 pm
Are you a Stylus owner?: yes
Location: ASTON CLINTON BUCKS

YOKO's

Post by stylussprinter »

If you buy YOKO's there's only one place to go -- GEORGE POLLEY MOTORSPORT :wink: If you fit R888's then be very careful when -- braking -- turning the wheel :roll: in the wet :roll:
I just love the Stylus but she keeps swallowing £££ !
Alfa Red 159 2.4 jtdm ti 260bhp 365lbft / BilsteinB12 + Adjustable Powerflex camber/castor bushes. Red STYLUS 2lt zetec 231bhp 185lbft Dunnell . RED 1972 Alfa 2lt GTAm replica 170bhp.
Pete&Matt
Stylus owner
Posts: 617
Joined: Thu Mar 09, 2006 4:08 pm

Post by Pete&Matt »

ill see what george polley can do then and go from there. Would you recommend 205's or 225's?
stylussprinter
Stylus owner
Posts: 3772
Joined: Fri Mar 10, 2006 8:49 pm
Are you a Stylus owner?: yes
Location: ASTON CLINTON BUCKS

225 's

Post by stylussprinter »

You don't really want 225's on 7 inch rims . At some point , climbing up in section width , the ' footprint ' will no longer be flat . I.E. too wide and the tread footprint will be convex --- 225 on a 7 inch may measure 6 or less on the ground so no gain :roll:

On ' 7 ' rims -- 195 , 205 or 215 . Ask at a fitting or supplying company to check . Also the wall of the tyre will be VERY close to the shock using 225 's on the rears IF not touching it :roll: Whatever tyre size you use will effect the set up .As I've said many times on other threads TYRES , PRESSURES , SPRINGS , SHOCKS , RIDE HEIGHT & WEDGE all effect car behaviour so no one can give you a definitive instruction at arms length. Driving a car myself will tell me what to do BUT not receiving that info via another :wink:

EG. If you fitted 195's front and 215's rear , I'd expect it to understeer , assuming average camber/toe and a 15mm wedge -- for example . If you upped the wedge , understeer would decrease BUT all the other things mentioned play a part too .

Sorry but it's a black art :lol:
I just love the Stylus but she keeps swallowing £££ !
Alfa Red 159 2.4 jtdm ti 260bhp 365lbft / BilsteinB12 + Adjustable Powerflex camber/castor bushes. Red STYLUS 2lt zetec 231bhp 185lbft Dunnell . RED 1972 Alfa 2lt GTAm replica 170bhp.
Pete&Matt
Stylus owner
Posts: 617
Joined: Thu Mar 09, 2006 4:08 pm

Post by Pete&Matt »

is it best to have wider on the rears and narrower on the front then? maybe 195's on front and 205's on the rear?
Post Reply