Page 1 of 1

ZETEC Dunnell & Weber bits !

Posted: Sat Feb 21, 2009 4:48 pm
by stylussprinter
Pair of Weber 45's jetted & choked & linkage (to Dunnell head & 1st stage cams = 200bhp)
Dunnell engine management/loom & 3D throttle pot for above (Dunnell says he will support i.e. recalibrate free of charge to my buyer :!: )
4 adonised red alloy flared trumpets for greater airflow/bhp
Inlet manifold ''fettled'' by Dunnell for above
40 CHOKES FITTED + 36'S SPARES & OTHER JETS PLUS PIPES & ADONISED ENDS / FILTER

PAIR 45's with 40 chokes & twin cable linkage £430
Dunnell 1st stage exhaust cam £100
Dunnell ECU & loom Zetec for carb's £300(Dunnell will re-calibrate FOC)
3 D Throttle pot for carb's £30
Set of 36 chokes £30
3 Sets of main jets £10
Original set of long trumpets £30
Set of red adonised alloy fully radiused trumpets £50 --- now sold :!:
Red Top competition fuel pump with spare new filter £30 ------ now sold :!:


Poly header tank with alloy bulkhead brackets = £10
Quad headlight & dipped light(one of each only - can be sourced singularly) = £75 (£108 & post new)


http://upload7.postimage.org/17673/photo_hosting.html]Image[/url]

Image

Re: ZETEC Dunnell & Weber bits !

Posted: Mon Dec 21, 2009 12:21 pm
by stylussprinter
This is the exhaust cam mentioned above . Dunnell can match this with an Inlet at well below his original retail cost to me .(It was £265 new) Try him for a quote to match '' Rob Farley's '' exhaust cam :P

0144967776

Re: ZETEC Dunnell & Weber bits !

Posted: Wed Jul 18, 2012 10:22 am
by stylussprinter
ALL ABOVE ITEMS SOLD TODAY :P

Didn't ever turn up to collect :o Had agreed price and contact was via another forum :roll:

SO --- apart from the inlet manifold pictured above it's for sale again ----- any offers considered :roll: