Page 1 of 3

My 1st event in a new class !

Posted: Thu Jun 15, 2006 10:57 pm
by stylussprinter
Hi Guys ,
I've entered the STYLUS into class D9 which is sports libre . The event is at GOODWOOD on 1st July and run by the TUNBRIDGE WELLS MOTOR CLUB. It's a class of mostly high powered , light cars on slicks with no lights / windscreens / tax, insurance , mot etc . This year I've not made it road legal , saving £500 so it's the only available class . I'll report on the result after the event.
Probably got a good idea what the result might be against these specialist cars but it will give the STYLUS at outing at GOODWOOD which is my favourite track ---------------- SO scary !!!!!!!!!!!!!!! :roll: :roll: :roll: :roll:

Rob.
Just had confirmation of my entry for the event / car number / class etc. The class I ran in last year has cars/drivers that I've previously beaten --- what a bummer , could have had a 1ST !
The class I'm in for this event has just two cars , me and a Radical SR4 450kg with 252bhp , slicks , wing , sequential box etc etc so it will be very hard to be 1st in this event !!!!!!!!!!
Should be fun trying though ! :D :D

Posted: Fri Jun 16, 2006 5:18 pm
by MattD
Rob

I've got clearance from the boss, so see you there ...

Matt

SSC day ?

Posted: Sat Jun 17, 2006 7:23 am
by stylussprinter
That's great Matt , Tim is coming from Wales too , in the RT so could stir some future business for SSC !

Posted: Mon Jun 19, 2006 11:05 am
by alecmartin19
hi Rob,

just a quick message to say good luck in your new class and I hope you show 'em who is really the boss.

Hopefully when my car is finished i too will be able to meet with everyone and join in on the fun.

Alec

Posted: Mon Jun 19, 2006 8:55 pm
by BAILSWGT214
Hi Rob
I will be there , the boss is coming as well , if she does not change her mind ? ? , got to sort out the horse first , muck out etc , might just tell her to drive her own car down , Image


cheers Andy

Posted: Tue Jun 20, 2006 9:04 am
by stylussprinter
Thanks for the confidence boost Alec , I'll need it and it would be great to have a Stylus competitor with all these cateringvans and westies !. Andy your car looks as though you just finished it yesterday ! Still like those wheels ! :roll: :roll:

Propulsion !

Posted: Tue Jun 20, 2006 4:42 pm
by stylussprinter
alecmartin19 wrote:hi Rob,

just a quick message to say good luck in your new class and I hope you show 'em who is really the boss.

Hopefully when my car is finished i too will be able to meet with everyone and join in on the fun.

Alec

So what's propelling your beastie then Alec ? Second hand 'jump jet' at a favourable price ? :shock:

Posted: Wed Jun 21, 2006 11:32 am
by alecmartin19
i wish! that would be a bit different wouldn't it!

I've got a 1.8 zetec at the moment with weber twin 40 DCOE's. Its got the 2 litre cam shafts in it but apart from that pretty standard apart from the inlet and exhaust ports being tidied up slightly.

After finishing my car I will be building my own 2 litre Zetec turbo. I was thinking about a cozzie lump but thats been done too much and i'd like to build an engine myself. Plus if i put a cozzie engine in the exhaust will be on the wrong side as well as a few other problems.

Should be an exciting project and having the 1.8 to start will give me a bit of an idea as to how the car performs before I go mad and try a jet engine for size!! :twisted:

Posted: Wed Jun 21, 2006 5:44 pm
by stylussprinter
alecmartin19 wrote:i wish! that would be a bit different wouldn't it!

I've got a 1.8 zetec at the moment with weber twin 40 DCOE's. Its got the 2 litre cam shafts in it but apart from that pretty standard apart from the inlet and exhaust ports being tidied up slightly.

After finishing my car I will be building my own 2 litre Zetec turbo. I was thinking about a cozzie lump but thats been done too much and i'd like to build an engine myself. Plus if i put a cozzie engine in the exhaust will be on the wrong side as well as a few other problems.

Should be an exciting project and having the 1.8 to start will give me a bit of an idea as to how the car performs before I go mad and try a jet engine for size!! :twisted:
Don't think anyone else has turbo'd the 2lt into a Stylus ----- that should give around 210 maybe 220 bhp and lots of torque ay ??

Watch your space with interest ! 8) 8)

Posted: Thu Jun 22, 2006 10:23 am
by alecmartin19
i think with a little bit of cash (or maybe a lot of cash) i should be able to push 300 bhp with a 2 litre. i'm not sure how reliable it would be though. i think 250 would be a nice figure to aim for.

i'll keep you posted on my progress! i'm trying to borrow a digi camera soon so i should have some pictures on the site in the near future.

hope you like my car. I do!! :D

Posted: Thu Jun 22, 2006 7:22 pm
by kevp
As an alternative to turbo I believe there is an engine company in Salisbury that fits superchargers to Zetec's.
Kev

Posted: Fri Jun 23, 2006 9:25 pm
by alecmartin19
what they called then? that sounds like fun. no turbo lag. it really will be like having a jet.

Awesome!! :twisted:

let me know the name and i'll make some enquiries.

cheers

Alec

Posted: Sun Jun 25, 2006 12:15 am
by kevp
http://www.tvrcraft.com/

Autocraft in Salisbury. Pictures of a Supercharged Zetec engine can be found on the website. I think it may be easier than turbocharging.

Posted: Sun Jun 25, 2006 10:50 am
by stylussprinter
kevp wrote:http://www.tvrcraft.com/

Autocraft in Salisbury. Pictures of a Supercharged Zetec engine can be found on the website. I think it may be easier than turbocharging.
I've had a good search Kev' but can't see a zetec supercharged. Think I'll contact them anyway for a ball park cost.

Goodwood Saturday

Posted: Fri Jun 30, 2006 8:40 pm
by kevp
Hi Rob
I will be in London working in morning. Will call in during the afternoon. Good luck.

Kev