Page 1 of 1
Head pad for head/roll bar
Posted: Tue May 25, 2010 12:21 am
by Ned
Good evening, after a unwelcome introduction of the rollbar and the back of my head
i thought a nice pad would be a good investment for both sides, does anyone have contact details of any suppliers...Phil
Re: Head pad for head/roll bar
Posted: Tue May 25, 2010 9:55 am
by CMA
I currently have a temp piece of pipe insulation on mine so take the edge off it but i've been looking for some pads too.
One place I've come across is Intatrim:
http://www.intatrimtelford.co.uk/index. ... t&Itemid=1
They will make it to what ever patern you desire, no idea what the cost is though.
Re: Head pad for head/roll bar
Posted: Tue May 25, 2010 6:57 pm
by kevp
When I SVA'd mine, I was advised to fit a pad on the rollbar. However Rollbar padding or pipe insulation was not considered good enough on its own. I had to get some rollbar padding & make up some "pillows" to fit it in. The tester would not let it go unprotected as the UV rays would perish the foam.
Re: Head pad for head/roll bar
Posted: Thu May 27, 2010 10:45 pm
by Ned
Thanks guys i will contact those people and get costs......phil