Page 4 of 10

Re: body parts

Posted: Tue Mar 24, 2009 12:17 am
by stylussprinter
Antnicuk wrote:I would like to do snetterton, not been there yet. I have done a few track days with lotus on track, I'm taking the stylus back to abbeville (france) with them in july. Went last year and had blast in the M3 and a load of RX7's. LoT dont care what car it is.
They may not care but their info says road going :roll: so I wrote to them asking if they would accept a previously road going car that now only has an MSA log book -- sent pic's etc . Had a nice reply saying welcome :)

Re: body parts

Posted: Tue Mar 24, 2009 9:17 am
by alecmartin19
rob, in regards to painting your car, i painted mine with very good results. i have all the kit to spray the paint including a descent gun and a 3hp compressor with a big tank that i'm sure you could borrow. as for spraying, its easy. its the prep work that takes the time and as long as you don't rush it you'll get a good finish. if you get runs, even they can be cut back.

up to you mate but the kit is there to borrow should you need it. i could even give you a hand if you wanted.

Re: body parts

Posted: Tue Mar 24, 2009 10:11 am
by stylussprinter
alecmartin19 wrote:rob, in regards to painting your car, i painted mine with very good results. i have all the kit to spray the paint including a descent gun and a 3hp compressor with a big tank that i'm sure you could borrow. as for spraying, its easy. its the prep work that takes the time and as long as you don't rush it you'll get a good finish. if you get runs, even they can be cut back.

up to you mate but the kit is there to borrow should you need it. i could even give you a hand if you wanted.
I'm really grateful for your offer Alec , but I couldn't manage all that prep' , getting old has it's disadvantages like not being able to convert to rose joints in your shoulders etc :lol: (got one in my hip though :lol: ) As it is , working on the car has painful consequences , just using spanners and a saw blade :o
Time also is a factor -- I've registered into the Championship and entered one event so if it's not ready I'll lose that money :x
Also , it's Tuesday already and I've not heard that the body's ready so far :? Then there's all the fittings to make/fit , indicators to wire and cut into the body , arches to enlarge/flair -- etc etc :roll:
If I'd had the body in 2008 maybe I'd take another view but I'm under pressure now :o

Re: body parts

Posted: Tue Mar 24, 2009 8:48 pm
by alecmartin19
ok then no problem!

if you need a hand spannering or anything like that though and time is really getting tight, give me a shout and i'll come and give you a hand. i'm still hoping to be down soon anyway.

Re: body parts

Posted: Tue Mar 24, 2009 10:37 pm
by stylussprinter
alecmartin19 wrote:ok then no problem!

if you need a hand spannering or anything like that though and time is really getting tight, give me a shout and i'll come and give you a hand. i'm still hoping to be down soon anyway.
Many thanks Alec , I'd be pleased to see you anyway :)

Re: body parts

Posted: Sat Mar 28, 2009 10:32 am
by stylussprinter
Well , '' early next week '' has been and gone :o --- so hoping to fit a front flip this weekend's out too :(

I think this 'Duffee' character must be earning too much :roll: I'll have to phone the paint guys and put it off also cancel my Goodwood April sprint entry :x
Tim's probably getting pissed off receiving texts and emails from me too :oops:

Re: body parts

Posted: Thu Apr 02, 2009 10:55 am
by stylussprinter
Just had a text from Tim saying it's done and ready to pick up at last :D

Re: body parts

Posted: Thu Apr 02, 2009 1:32 pm
by Pete&Matt
glad to hear that Rob. Any news on the hood rail that goes on the screen?

Re: body parts

Posted: Thu Apr 02, 2009 1:47 pm
by stylussprinter
Pete&Matt wrote:glad to hear that Rob. Any news on the hood rail that goes on the screen?
No other info , just that text this morning :roll: I'm trying to put Tim's proposed build manual that he wrote in 2006 up on the site but having no success yet --- too big maybe :?: It's been in my files since I first read it then the business ceased :wink:

Re: body parts

Posted: Thu Apr 02, 2009 10:37 pm
by bluestu
Good news at last!!! :D when are you picking it up??

let me know if you need any help.

Re: body parts

Posted: Thu Apr 02, 2009 11:44 pm
by stylussprinter
bluestu wrote:Good news at last!!! :D when are you picking it up??

let me know if you need any help.
Tim's intending to deliver but I don't yet know when , just hoping it'll be this weekend :)

Re: body parts

Posted: Fri Apr 03, 2009 7:29 pm
by stylussprinter
It'll be arriving late evening on Monday 6th April but he has it in the van ready plus a few hood rails and headlight covers. I 've asked him to bring whatever he's got :wink:

Thought I'd be busy this weekend :(

Re: body parts

Posted: Fri Apr 03, 2009 8:36 pm
by Pete&Matt
hood rail would be good please :)

Re: body parts

Posted: Fri Apr 03, 2009 9:56 pm
by kevp
Rob

Have you fitted the FIA dry break on the fuel line yet? If not, its something for you to do this weekend. :lol:

Re: body parts

Posted: Fri Apr 03, 2009 10:09 pm
by Antnicuk
glad to hear its on its way, headlight covers are good too! I cracked one of my glass lenses putting the car on the traielr today :roll: ready for the trackday tomorrow at Woodbridge.