Page 1 of 1

Poly bush group buy

Posted: Mon Jun 20, 2016 4:02 pm
by norma
I have got hold of Wisbech Engineering for a price for replacement bushes.
They have the original drawings and the dimensions are correct for my 1997 chassis.
(see attached - hopefully!)
Anyone interested in a group buy? It might help the price.

Thanks!

Re: Poly bush group buy

Posted: Mon Jun 20, 2016 9:05 pm
by stylussprinter
Still got a dozen sets thanks , centres stainless

Re: Poly bush group buy

Posted: Tue Jun 21, 2016 12:01 pm
by norma
bloody show off lol
:-)

Re: Poly bush group buy

Posted: Tue Jun 21, 2016 3:20 pm
by stylussprinter
:P :lol: :lol: :lol:

Re: Poly bush group buy

Posted: Tue Jun 21, 2016 5:23 pm
by parleys
If you add up the dimensions of the outer sleeve and the polybush it comes to the same length of the inner sleeve.
The inner sleeve needs to protrude both ends. Looking at hints to there installation the inner sleeve should protrude by 0.02" (0.5mm). I can see the dimension 1.5+ but how much +?
When building my stylus the outer sleeves were not square and needed machining to enable the inner sleeve to be pinched tight.

Re: Poly bush group buy

Posted: Wed Jul 06, 2016 11:04 pm
by se7ensport
I used these https://www.ondrives.com/cps13x19x05

I was able to space to my exact requirements; all sleeves set to +0.5mm over the bush width. Clamped up very tight and the bush rotates around the sleeve with minimal resistance and near zero lateral play.

Re: Poly bush group buy

Posted: Thu Jul 07, 2016 9:57 am
by MattD
I've got a bin full from Wisbech..... how many do you want :lol:

Re: Poly bush group buy

Posted: Mon Jul 11, 2016 6:36 pm
by norma
MattD wrote:I've got a bin full from Wisbech..... how many do you want :lol:
You need to check your pm's more often then, as I asked you if you could supply before going to wisbech lol

Re: Poly bush group buy

Posted: Wed Jul 13, 2016 3:01 pm
by MattD
norma wrote:
MattD wrote:I've got a bin full from Wisbech..... how many do you want :lol:
You need to check your pm's more often then, as I asked you if you could supply before going to wisbech lol
LOL :roll: