Evening
Needed to switch out the N/S lower ball joint and ordered a Quinton Hazell QR1774RHT as listed on the main website, attempting to fit it I discovered the part I had been supplied has a left hand thread!
I know that the Sherpa does have a left hand thread and a right hand thread version and had assumed that the suffix of RHT in the part number identified the thread, on the box under the part number it states "Tie Rod End -LH" is this correct and I have been supplied with the right box but with the wrong part in it or is it the same part number but with wording "Tie Rod End - RH" (or similar) that I need?
Thanks
Alex
Lower ball joint part number
- se7ensport
- Stylus owner
- Posts: 349
- Joined: Thu Aug 24, 2006 3:17 pm
- Location: Bristol
- norma
- Posts: 334
- Joined: Sat Apr 07, 2007 10:24 pm
- Are you a Stylus owner?: yes
- Location: Chester UK
Re: Lower ball joint part number
as far as I know, QR1774RHT is a right hand thread, sounds like the wrong part in the right box!?
Another Alex
Another Alex
SSC Sylus 2.0 Dunnell Black Top Zetec weber alpha / DTA + cams, 236@fly. (aka NORMA)
-
- Posts: 232
- Joined: Wed Jan 30, 2008 2:09 pm
- Are you a Stylus owner?: yes
- Location: Suffolk
- Contact:
Re: Lower ball joint part number
As a slight aside, QH went into administration a short while ago. The IP (only) was bought by Tetrosyl.
DH2
DH2
- norma
- Posts: 334
- Joined: Sat Apr 07, 2007 10:24 pm
- Are you a Stylus owner?: yes
- Location: Chester UK
Re: Lower ball joint part number
well, I might have some spare ones lying around as I have a rose joint setup ready to fit now.
I can have a look if you like.
Alex
I can have a look if you like.
Alex
SSC Sylus 2.0 Dunnell Black Top Zetec weber alpha / DTA + cams, 236@fly. (aka NORMA)
- se7ensport
- Stylus owner
- Posts: 349
- Joined: Thu Aug 24, 2006 3:17 pm
- Location: Bristol
Re: Lower ball joint part number
Alex, thanks for the kind offer, I'm expecting to be able to sort an exchange tomorrow with the local motor factor, I wanted to check where the error lay.
-
- Stylus owner
- Posts: 3772
- Joined: Fri Mar 10, 2006 8:49 pm
- Are you a Stylus owner?: yes
- Location: ASTON CLINTON BUCKS
Re: Lower ball joint part number
I was under the impression that that part was from the SHERPA track rod end NOT the tie rodse7ensport wrote:Alex, thanks for the kind offer, I'm expecting to be able to sort an exchange tomorrow with the local motor factor, I wanted to check where the error lay.
I just love the Stylus but she keeps swallowing £££ !
Alfa Red 159 2.4 jtdm ti 260bhp 365lbft / BilsteinB12 + Adjustable Powerflex camber/castor bushes. Red STYLUS 2lt zetec 231bhp 185lbft Dunnell . RED 1972 Alfa 2lt GTAm replica 170bhp.
Alfa Red 159 2.4 jtdm ti 260bhp 365lbft / BilsteinB12 + Adjustable Powerflex camber/castor bushes. Red STYLUS 2lt zetec 231bhp 185lbft Dunnell . RED 1972 Alfa 2lt GTAm replica 170bhp.
- se7ensport
- Stylus owner
- Posts: 349
- Joined: Thu Aug 24, 2006 3:17 pm
- Location: Bristol
Re: Lower ball joint part number
Love google images:
http://www.redlinecarparts.com/#qr1774l ... 90610.html
I've been supplied with part number QR1774LHT in a QR1774RHT box.
http://www.redlinecarparts.com/#qr1774l ... 90610.html
I've been supplied with part number QR1774LHT in a QR1774RHT box.
-
- Stylus owner
- Posts: 3772
- Joined: Fri Mar 10, 2006 8:49 pm
- Are you a Stylus owner?: yes
- Location: ASTON CLINTON BUCKS
Re: Lower ball joint part number
Twats
I just love the Stylus but she keeps swallowing £££ !
Alfa Red 159 2.4 jtdm ti 260bhp 365lbft / BilsteinB12 + Adjustable Powerflex camber/castor bushes. Red STYLUS 2lt zetec 231bhp 185lbft Dunnell . RED 1972 Alfa 2lt GTAm replica 170bhp.
Alfa Red 159 2.4 jtdm ti 260bhp 365lbft / BilsteinB12 + Adjustable Powerflex camber/castor bushes. Red STYLUS 2lt zetec 231bhp 185lbft Dunnell . RED 1972 Alfa 2lt GTAm replica 170bhp.